Skip to main content

Open 24/7 for no heat, leaks and backups

Dr. Boilerby Encano

Richmond boiler replacement · open 24/7

Boiler Installation in Richmond, BC sized for your home, priced before we start

New combi or high-efficiency condensing boiler, sized by a real heat-loss check, with a flat-rate price you agree to before any work starts.

  • 5.0 on Google, 56 reviews
  • Free assessment in Richmond
  • 1-year workmanship warranty
Indirect hot water tank piped to a boiler with new copper lines, installed by Encano
Encano boiler and tank job (from our Google profile)

What does a boiler installation in Richmond, BC involve?

A boiler installation means sizing the new unit from your home’s heat loss, choosing a combi or a boiler with an indirect hot water tank, removing the old boiler, and connecting the new one to your hydronic loops, gas line, venting and condensate drain. Permit and inspection are arranged where required. The price depends on the job, the time and day, and whether it is an emergency, and you get it in writing before any work starts.

Most boilers we replace in Richmond are not dead yet. They are old, loud, short-cycling, or one part away from a long wait for something the supplier no longer stocks. Better to plan the swap now than during a January cold snap.

Hydronic heat is common in Richmond townhouses and in many newer houses: radiant floors, hydronic baseboards, and a boiler tucked into a garage or a tight mechanical closet. Space matters here. Often the best upgrade is a wall-hung combi boiler that heats the home and makes on-demand hot water, freeing the floor where a tank used to sit. In larger homes with several bathrooms, a boiler plus an indirect tank usually serves the family better.

The Encano team sizes the new boiler from a heat-loss check of your actual home, not from the number printed on the old nameplate. Older boilers were often oversized by a wide margin, and copying that size into a modern condensing boiler wastes gas and makes the new unit cycle on and off. You get the options in plain language, a written flat-rate price, and a clean install.

Signs your Richmond boiler is due for replacement

  • It is 15 to 20 years old or more

    Many boilers reach the end of their service life in that window. Efficiency drops and parts get harder to find.

  • You have paid for repairs two winters in a row

    Repeated calls for the same unit add up fast. Past a point, that money is better spent on a new boiler.

  • Water around the base or a cracked heat exchanger

    A leaking or cracked heat exchanger is usually not worth repairing. It is the heart of the boiler.

  • Some rooms or floor zones never get warm

    Cold radiant zones and lukewarm baseboards can point to a tired or poorly sized boiler, not only air in the lines.

  • Not enough hot water for the household

    If showers run cold when the heat is on, the boiler, combi or indirect tank may be undersized for how you live now.

What a Richmond boiler installation includes

Every install is quoted as one flat price that covers the work below, so the number does not move once we start.

Heat-loss sizing and system choice
We check windows, insulation and your radiant or baseboard layout, then recommend a combi boiler or a boiler with an indirect tank, sized for real demand.
Removal of the old boiler
We drain the system, disconnect and remove the old boiler and any tank it replaces, and haul it away.
Piping, pumps and zone controls
New near-boiler piping, circulator pumps, valves and zone controls so each floor or radiant zone heats evenly. Existing hydronic loops are flushed and reused when they are in good shape.
Venting and condensate drain
High-efficiency condensing boilers vent through the wall or roof with sealed piping and produce acidic condensate. We route the vent to code and give the condensate a proper drain, with a neutralizer where it is needed.
Gas connection and startup
Gas line connected and tested, boiler commissioned, combustion checked, and thermostat and controls set up. We show you how it works before we leave.
Permit and inspection where required
Gas and heating work in BC usually needs a permit. We arrange the permit and inspection where required, so the install is on record for your insurance and resale.

How your boiler replacement runs

  1. 01

    Call or text for your price

    Send a photo of the old boiler and its nameplate to (604) 764-2031. We book a visit to see the space, the piping and the hot water setup.

  2. 02

    Heat-loss check and written quote

    We size the system, explain combi versus boiler plus tank for your home, and give you a flat-rate price in writing. No work starts until you agree to it.

  3. 03

    Install day

    Most straightforward replacements are done in a day or two. We protect floors, keep the work area tidy, and keep you posted if anything changes.

  4. 04

    Startup, walkthrough and clean-up

    We commission the boiler, test every zone, show you the controls, clean up, and back the work with our 1-year workmanship warranty.

Boiler replacement cost in Richmond, BC: how we price it

We do not post a price list, because the price depends on the service, the time and day you need us, and whether it is an emergency. You get one flat price in writing before any work starts.

What you pay forHow it is priced
Boiler or combi replacementHome size, combi versus boiler plus indirect tank, extra zones, venting route and permits.Quoted in writing before work starts
Repair instead of replacementWhen the boiler is sound, we price the repair too so you can compare.Quoted in writing before work starts
Nights, weekends and emergenciesTiming changes the price. Planning the swap before winter keeps it simple.Quoted in writing before work starts

Your price depends on the service, the time and day, and whether it is an emergency. You see the exact price in writing and agree to it before anyone touches a tool.

The assessment is free in Richmond. Outside Richmond, travel time is charged, and we quote it before we come out. If you go ahead with the work, you get a discount on that travel time. You always know the price before we go.

Repair or replace your boiler?

We give you the honest answer even when it is the cheaper one. A repair is often the right call on a younger boiler. Here is how we think it through with you.

Repair it when

  • The boiler is under about 15 years old and has been reliable until now.
  • The fault is a single part like a pump, igniter, pressure valve or sensor, and the part is available.
  • The heat exchanger is sound, with no leaks or cracks.

Replace it when

  • The boiler is 15 to 20 years old or more and efficiency has dropped.
  • You have paid for repeated repairs over the last couple of heating seasons.
  • The heat exchanger is cracked or leaking.
  • Replacement parts are discontinued or weeks away.
  • You want to free up space with a combi or need more hot water than the current setup gives.

Boiler installs in Richmond townhouses and houses

Richmond sits on Lulu Island in the Fraser River delta, close to sea level, with a high water table and a long, damp wet season. Boilers here often live in garages and ground-floor utility rooms, so we check for corrosion at the base, rusted fittings and moisture around the old unit before we plan the new one. Condensate needs a reliable drain path, which takes some thought in a slab-on-grade townhouse.

Strata townhouse complexes in areas like Steveston, Terra Nova and City Centre often have radiant floors fed by a compact boiler in a closet, with strict limits on where a vent can exit. We plan the vent route first and can help you prepare the details your strata may ask for. Older detached homes in Seafair, Broadmoor and Blundell sometimes still run on oil, which is where a switch to natural gas makes sense.

Neighborhoods we work in

  • Steveston
  • Terra Nova
  • Broadmoor
  • Seafair
  • Blundell
  • Garden City
  • City Centre
  • Brighouse
  • Thompson
  • Hamilton
  • East Richmond
  • Riverdale

Plan your boiler swap before the cold snap

The heating season in Metro Vancouver runs roughly October to April. Late summer or early fall is the best time to replace a boiler: you pick the day, and a few hours without heat is no hardship.

If the old boiler quits in the middle of winter, we handle emergency replacements too. We are available 24/7 for emergencies and will talk you through your options while the new boiler is sourced. If you ever smell gas, leave the home and call FortisBC’s 24-hour emergency line at 1-800-663-9911 and 911 from outside. Never ignore a carbon monoxide alarm.

Encano Plumbing is licensed and insured. Gas work is done by a licensed gas fitter. Permit and inspection arranged where required.

Ask us anything

56 reviews on our Google profile, copied word for word.

5.056 Google reviews(opens our Google profile in a new tab)
  • Makoto Taniguchi Google profile photoMakoto TaniguchiGoogle review · 6 months agoGoogle review
    Eddie was friendly, gave me a good quote, came in early and explained the tasks prior to starting and did an excellent job. Highly recommended.
  • Luiz Portella Google profile photoLuiz PortellaGoogle review · 7 months agoGoogle review
    Eddie is amazing! Great customer service and attention to details. He helped me with a leaky shower that needed a cartridge replacement and a couple of other minor repairs. 5 stars hands down. I recommend!
  • Talitha Nobrega Google profile photoTalitha NobregaGoogle review · 7 months agoGoogle review
    Second time using Encano Company, and Ed was amazing once again! He’s reliable, professional, and gets the job done quickly. Really appreciate the great service highly recommend!
  • BY K Google profile photoBY KGoogle review · 6 months agoGoogle review
    Really thankful to Ed for replacing our kitchen sink and garbage disposal. The service was fast,very professional and the quality of work was excellent. Highly recommend!
  • Onilton Maciel Google profile photoOnilton MacielLocal Guide · 3 months agoGoogle review
    Eddie is amazing. He is professional and quick in resolving the issues. He has very fair prices. Highly recommend!
  • gustavo de almeida frança Google profile photogustavo de almeida françaGoogle review · 3 months agoGoogle review
    Eddie is super friendly, helpful, and transparent! Always making sure his clients understand what needs to be done and how much it will cost ahead of time.
  • Pam Andrews Google profile photoPam AndrewsLocal Guide · 3 months agoGoogle review
    Great service. Eddie is knowledgeable and informative. Arrived very quickly and did an excellent job.
  • Larissa Rodrigues Google profile photoLarissa RodriguesGoogle review · 6 months agoGoogle review
    Eddie is very responsible! Best plumber in Vancouver area. I called him due to an emergency and he stopped by at the same day. I highly recommend him. 10/10

Boiler Installation questions

Straight answers. If yours is not here, text it to us.

Yes. When a job needs a permit from Technical Safety BC, the health authority or the city, we pull it ourselves. The job is only finished once it passes inspection, and you only pay for permitted work after it passes.
We do not post a price list, because the price depends on the job, the time and day, and whether it is an emergency. Combi boilers, indirect tanks, extra zones, long vent runs and permits all change it. We give you a flat-rate price in writing after an in-home assessment (free in Richmond, travel time quoted first elsewhere), and no work starts until you agree to that number.
A combi boiler heats the home and makes hot water on demand in one wall-hung unit, which suits townhouses and smaller homes short on space. A boiler with an indirect tank stores hot water, so it handles several showers at once better. The right choice depends on your bathrooms, household size and space, and we walk you through it on site.
We can, but we usually advise against it. Many older boilers were oversized, and the nameplate does not reflect today’s windows or insulation. We size the new boiler from a heat-loss check of your home. A correctly sized condensing boiler runs longer, steadier cycles, uses less gas and tends to last longer than an oversized one.
In most cases, yes. Radiant floors and hydronic baseboards can be kept and connected to a new high-efficiency condensing boiler. Radiant floors pair especially well because they use lower water temperatures, which lets a condensing boiler run efficiently. We check the existing loops, flush them, and replace valves or pumps that are worn.
Gas and heating work in BC usually needs a permit and inspection. We arrange the permit and inspection where required as part of the job, so the installation is documented for your insurance and for a future sale. If you live in a strata, check your bylaws too, especially for vent locations on exterior walls.
FortisBC offers a rebate for homes switching from oil or propane to a natural gas furnace, boiler or combi. It applies to new gas customers only, the bonus needs a pre-qualification code before Dec 31, 2026, and it does not cover replacing an existing gas boiler. We will tell you if your project may qualify and point you to the official page.
A straightforward boiler replacement in a Richmond house or townhouse usually takes one to two days. Switching from a tank to a combi, adding zones, or moving the vent can add time. We give you the schedule with your written quote, and we keep you posted on install day if anything changes.
Yes. Our installation work comes with a 1-year workmanship warranty, and the boiler itself carries its own manufacturer warranty, which we explain at the walkthrough. Encano is licensed and insured, family-owned, and rated 5.0 on Google across 56 reviews. You can pay by card, cash or bank transfer.

Open now · 24 hours, 7 days

No heat at 2 a.m.? Call or text. We pick up.

Check the thermostat and the furnace or boiler power switch first, then call or text. The Encano team answers 24/7 and gives you the price before anyone touches a tool.

Call or text (604) 764-2031

Get your boiler installation price

Tell us what is going on. We reply with next steps and a time, and the price is agreed before any work starts.

Request an estimate

Tell us about your project and we will get back to you quickly. You know the price before we come out.

Photos (optional)

Photos help us quote faster. Up to 5.

We never share your info. The Encano team will get back to you soon.

Prefer to text?

Text us a photo of the problem

Snap a picture of the leak, drain or heater and send it to (604) 764-2031. Open 24/7.